Deep Concealment

There were Ankle Holsters, then so-called ‘Tuckables,’ but Nothing Beats a Pistol in your Pocket!

I began thinking about a deep concealment rig when I watched “The French Connection” for about the fifteenth time, just to watch Gene Hackman dive behind a tree to duck rounds fired by a rooftop sniper while reaching down to draw a snubbie .38 Special revolver from that holster on his ankle.

Later on, I carried an old Chief’s Special in an ankle rig that fit very well inside of my cowboy boot while working as an editor at a small weekly newspaper. I occasionally carried a flatter .32-caliber Beretta semiauto the same way, and the notion of having a pistol that nobody could detect in a place they wouldn’t be looking was both intriguing and very practical.

Such pistols are handy, within reach at all times, and unnoticeable because most people don’t walk around staring at someone’s ankles…and the holster allows you have your gun in an emergency. I knew a female attorney who carried a revolver in an ankle holster, and with the proper slacks, one could not tell. Ditto a female cop.

CONCEALMENT FOR WOMEN

There are a couple of companies that build handbags and purses with special compartments for handguns. Such bags are worth the money when balanced against one’s safety. And, as noted earlier, most people don’t look for a hidden handgun—the average scumbag is surprised when an intended victim turns out to be armed and willing to shoot.

Some time back I chatted with a lady in real estate who tipped me to the fact that several of her female colleagues carried pistols on the job. There have been cases of real estate agents being robbed or murdered, and female realtors are often concerned about sexual assault, too.

Over the years, there have been some interesting products for women, including bra holsters and thigh holsters for very small pistols.

THE “TUCKABLE” HOLSTER

Years ago, a guy asked me to build a holster over which he could tuck a shirt. I diddled around with the project and it eventually turned into something copied by several other people; somewhere along the way it was dubbed the “tuckable.”

This was, and remains, a rig built for small handguns. The original prototypes were for a J-frame and a Walther PPK. I’ve had guys ask me to make them for Government Models and I turned them down. The biggest gun I’d ever suggest for such a rig is maybe an Officer’s Model or similar Kimber or Springfield compact.


Integral Holsters

One of the more intriguing options for pocket carry includes the integral pocket holster, like the Pocket Shot made by DeSantis. These holsters fit to your pistol semi-permanently, meaning that you can remove them when you want, but they’re intended to allow proper firing, cycling, and reloading, with the holster affixed to the gun. They don’t provide auxiliary protection for your trigger—like most traditional holsters—and won’t keep out the lint and grit, but they serve a larger purpose: to provide a low-drag, integral method of concealing the shape of your handgun for pocket carry! --Editor

For more information: www.desantisholster.com

Wallet-Printing
 Most pocket holsters are designed in a rectangular size and shape that fits your pocket—and their purpose—quite well.

When you sit down, the contents of your pants pockets “print” through the fabric, clearly showing their outline—keys, a phone, a pocket knife… If you intend to sit down in public, your gun will “print” its unmistakable outline unless you have it in a holster.

Pocket holsters are designed to approximate the size and shape of a wallet, so that even the most intent observer will think you’ve merely placed your wallet in a front pocket. --Editor

Workman’s deep cover rig has generically been called a “tuckable” because you wear it with a shirt tucked over the hidden sidearm. This is Mitch Rosen’s superb rendition.

In Search of a Trophy

This South African Safari Included an Encounter with Poachers and a Search for a World Record Mountain Reedbuck
By Thomas C. Tabor

"Tom, you've got to hunt mountain reedbuck. I know where we possibly could find the next world record," my PH and close friend, Carl Labuschage, kept telling me.

But in all honesty, I hadn't even considered hunting reedbuck of any kind on this trip. Months before I'd arrived in South Africa, I'd prepared a well thought out list of other plains game species that the walls of my trophy room just seemed to be screaming out for.

Surely, if finances weren't a consideration, I would have booked a 30-day safari all-inclusive of everything, including the Big Five. But unfortunately, like a lot of hunters, I don't fit in the category of being a wealthy financier and as such, expenses played a major role in the 10 animals that I'd selected to hunt.

TOP OF THE LIST

On the top of that list, I'd hoped to take a good kudu bull, which would move me a little closer to completing my collection of spiral-horned antelope; I wanted to bring home a warthog, which had somehow eluded me on my earlier safaris; and the eight others on the list were no less desirable, or no less challenging to hunt.

But what was possibly even more of a concern than the fairly small trophy fee for the reedbuck was my time restraints. There just didn't seem to be enough time to include a mountain reedbuck, but Carl persisted, pleading with me that I had to make time even at the cost of missing out on some other species. Knowing full well if I didn't agree I would surely regret it down the road, I finally asked Carl to make the necessary arrangements. First, however, I wanted to see a kudu bull on the ground and in the Zululand area, good quality kudu are not all that easy to come by.

BIRD OF PREY

Ruger’s High-Velocity Break-Action Air Hawk is a Natural Born Hunter

By James E. House

My association with Ruger products goes back almost 60 years, and I must say, it’s been a darned good ride.

   The Ruger Air Hawk is an entry-level break-action air rifle that can be
used for hunting small game and pests.

My first Ruger was the initial model that Ruger produced: the .22 auto standard model pistol. My second was one of the early Single Six models that had the flat loading gate with a curved thumbnail notch. That was followed by a Single Six in 1958. I’ve owned a considerable number of other Rugers over the years, but my most recent gun from Ruger is not a firearm; rather, it is an economical high-velocity break-action air rifle called the Air Hawk, and the subject of this month’s Air gunning evaluation.

NOT FOR KIDS

Like many other companies, Ruger has diversified the product line to include air guns made elsewhere but carrying the firearm label that is used under license. This is now common for Remington, Winchester and others, as well as Ruger. In this case, the importer is Umarex USA.

I recently bought a Ruger Air Hawk, which is a .177-caliber break action that is advertised to give velocities up to 1,000 fps. This “1,000 fps” category describes numerous break-action rifles, but pellet velocity depends on several factors, such as pellet weight and altitude. Yes, /altitude/, because just as it is harder for you to breathe at high altitude, cocking a break-action rifle at high altitude draws in less air in an analogous way. Less air in the compression chamber means less air compressed at the time of firing, and that means lower velocity.

Not having had firsthand experience with any of the Ruger airguns, I decided to remedy that situation by going to one of the big box stores and buying one. Of the Ruger models offered, the one that interested me most was the Air Hawk, because it is the most powerful, making it suitable for hunting small game and pests. The Air Hawk comes bundled with a 4x32 scope and mount and sells for slightly more than $100. So, what do you get for your money?

When I opened the box, I was impressed with how carefully the air gun was packed. Not all airguns are fully supported, so if the box is dropped on end, damage to the front sight can occur. The Ruger was fully supported on each end and in the middle by sturdy foam inserts. Moreover, the scope was neatly packed in a box that fit in recesses in the foam supports.

The rifle comes enclosed in a plastic sleeve. When I removed this, I was impressed with the hardwood stock. Although not beautifully grained, the stock is nicely shaped, with a raised Monte Carlo section to support the cheek. Also pleasing to me was the fact that the stock was of a conventional design, with no cutouts, thumb holes or a bulbous forearm. Compared to some of the modern break actions, this is a sleek air rifle of stylish design.

The Air Hawk measures 44.8 inches in length, weighs 7.9 pounds and has a cocking effort of 30 pounds. In summary, it is an air gun for an adult shooter.

NOTE: This was excerpted from a recent issue of Gun World magazine.

Kel-Tec’s Radical RFB Is Loaded with Power, Accuracy

Kel-Tec is not your normal gun manufacturer.

If anything, they are the polar opposite, with some of the most creative and singular designs in the marketplace. I had a chance to field test and review one of their most creative, “out-of-the-box-thinking” designs to date: the RFB, or “Rifle, Forward ejecting, Bullpup.” This extremely portable 7.62x51mm NATO rifle is one of the most interesting and intriguing weapons I have ever taken to the range or afield. Let’s lock and load and take a closer look at what makes the RFB such a show stopper!

History Lesson

Kel-Tec’s owner and founder George Kellgren is no stranger to the bullpup design. The RFB traces its roots back to the late 70’s at Interdynamic AB of Stockholm, Sweden, where George was involved with the design of two MKR bullpup rifles. Although neither MKR rifle ever reached the production stage, the “spine” concept, where all components were mounted around a long and rigid barrel, eventually carried over to the RFB.

Kellgren’s work on a bullpup design resumed in the early ‘90s after he founded Kel-Tec. His next bullpup design was the SUB-16, which used 5.56x45mm NATO ammo and standard M-16 magazines. The SUB-16 had dual pivoting extractors actuated by cam surfaces in the receiver and a forward eject feature. The project was suspended with the adoption of the Assault Weapons Ban in 1994.

Kel-Tec’s bullpup work resumed in 2003 with the SRT-6, a dedicated sniper rifle firing a special 5.56x45mm load. In mid-2005, they decided to have another try at the “Holy Grail” of bullpup rifle design, with forward ejecting operation, so the SRT-8 began development in the larger 7.62x51mm NATO caliber. Metric FAL magazines were chosen for the new rifle because of their availability. The design also featured a unique tilting bolt design. A stationary, curved sheet metal forward-chute solved some of the earlier expended case ejection problems and the early prototypes had 18” barrels for convenience of handling.

After the sunset of the assault weapons ban in 2004, they decided to rename the SRT to Rifle Forward ejection Bullpup and the RFB was born. Consequently, the names of the three main models were changed from Sniper (32” barrel), Hunter (24” barrel), and Battle (18” barrel), to the less menacing names Target, Sporter, and Carbine. The RFB was perfected during pre-production trial runs in 2008; Gen2 models were introduced in 2012, and include this RFB I’m reviewing.

Style Points

 The Kel-Tec RFB is unlike anything that you have ever pulled out of a case. The cool-factor is totally off the charts.

 The barrel of the RFB is made from 4140 Chrome-Molybdenum ordnance-grade steel. Recent models (mid-2012 production and later) employ a Salt Bath Nitride-QPQ (quench, polish, quench) finish. According to Kel-Tec engineer Ryan Williams, this process is superior to chrome-plating with a better overall (black) finish that offers superior corrosion and heat resistance and lasts longer.

The bolt, receiver and gas system are also made of 4140 steel, with the bolt receiving a special Titanium Nitride (yellow) finish that was chosen for its protective ability and its resistance to wear and flaking. Ryan also mentioned that the RFB was recently upgraded with a thicker CNC-machined piston plate that is welded onto the front side of the carrier that comes into contact with the gas piston during operation. The gas system was also redesigned to keep the parts simpler and to provide a larger adjustable gas setting range to accommodate different types of ammunition. Additionally, the new gas piston is a ring-less design and can be easily removed for cleaning. Lastly, the carrier channel has a longer internal spring that keeps some tension on the piston post for more reliable functioning.

Both the bolt carrier and upper cover are manufactured from stamped 4130 grade sheet steel that overlaps to offer excellent user protection in case of a catastrophic failure in the breech. A durable parkerized finish coats all external metal parts. The pistol grip and forward handguard are made from a high-tech polymer material. Each is textured to provide operators with positive purchase, plus the handguard features an integral slope or bump at the lower front end to prevent the user’s support hand from sliding forward and coming in contact with a potentially hot barrel.

EDITOR’S NOTE: This was excerpted from the January 2013 issue.

Take All The Anti-Gun Reporting With A Grain Of Salt

The Romans had a term for warning buyers about possible defects in property they purchased that might render it useless or unfit for the use for which it was intended. /Caveat emptor/ means “Let the buyer beware.” In other words, there was no liability on the part of the seller unless he/she concealed the defects or made false representations about the product being sold.

Of course, under today’s laws, buyers have many safeguards to protect them from defects or dishonesty—but certainly not for all products, and not all of the safeguards are enforceable, so buyers must still beware.

Today, Americans should familiarize themselves with another Latin term: /Caveat lector/. It translates as, “Let the reader beware,” and is similar in many ways to /Caveat emptor/. Rather than accept as fact everything they read or hear in the news, readers/listeners need to sort things out for themselves to determine what’s factual and what’s agenda driven.

This holds especially true in terms of Gun ownership, which is constantly under attack by the media, as well as by those who hold public office who believe the Constitution is “a living, breathing document,” whose text is meant to be flexible. Often, the handiwork of armed lunatics is used by the media and lawmakers to make us law-abiding gun owners look like we’re all a bunch of fanatics who live in the past.

During the two short years I’ve been editor of /Gun World/, Supreme Court Justice Breyer, who dissented from the majority in the landmark cases District of Columbia v. Heller (2008) and McDonald v. Chicago (2010) told Chris Wallace in a televised Fox News interview that the role of the court is to interpret the Constitution flexibly, in light of ever-changing consequences. We’ve also seen the ATF push for new regulations on gun dealers near the Mexican border—ironically, at the same time Fast and Furious was still in full swing.

In that same period, the tragic Tucson shooting led to an anti-gun outcry on the parts of both the media and members of Congress; the latter used it as an excuse to propose stricter gun-control laws, and the former crafted stories to influence public opinion in favor of these stricter regulations.